JEDEC says DDR6 will have 96-bit bus and 74 mm modules
★ Add us as a preferred source on GoogleTL;DR
JEDEC says the upcoming DDR6 memory standard will increase bandwidth by more than 50% at introduction and use a shorter 74 mm module length.
What changed
- JEDEC targets initial availability for the upcoming memory standard in the years 2028 or 2029. TweakTown ↗
JEDEC says the upcoming DDR6 DRAM standard will increase memory bandwidth by more than 50% at the start. The new standard targets AI, cloud, and data center workloads, but will also serve client computing.
JEDEC says data rates for RDIMMs will start at 12.8 GT/s and move toward 14.4 GT/s and beyond. This is an increase over the DDR5 rate of 9.2 GT/s. The data bus will expand from 64 to 96 DQ, a 50% increase in width.
The architecture will use pseudo-channels and double the bank count to improve efficiency. JEDEC says DDR6 will support DRAM die density up to 128 Gb. Modules will be shorter, at 74 mm compared to 133 mm for DDR5. JEDEC says the standard may include RDIMM, UDIMM, and CAMM form factors.
These specifications are current development plans and are not a finalized standard. JEDEC has not shared operating voltages or a release date. Reports say the new memory will not be backward compatible with DDR5 and that upcoming AMD and Intel desktop platforms will continue to use DDR5.
Via TechPowerUp ↗ · Also from Hardwareluxx ↗ · Other coverage: Wccftech ↗, VideoCardz ↗, Hardware Busters ↗, ComputerBase ↗, Club386 ↗, Notebookcheck ↗, PCWorld ↗, PC Gamer ↗, TechSpot ↗, TweakTown ↗, Overclock3D ↗, Igor's Lab ↗
Spot a mistake? Tell us